Thor H-THUNDER-4 handleiding
Handleiding
Je bekijkt pagina 4 van 24
H-THUNDER-4
Tel:(800)521‐8467Email:sales@thorfiber.comhttp://www.thorbroadcast.com
Chapter 1 – Introduction
Product Overview
The H-THUNDER-4 encoder modulator is Thor Broadcast’s new MPEG2 video modulator/encoder which is used to convert
HDMI signals into tangible RF channels in DVB-C/T/ATSC/ISDB-T. This low cost and speedy unit supports 4 HDMI inputs,
control and upgrade via web NMS, very easy front panel buttons for quick setup.
The signal source could vary from satellite receivers, closed-circuit television cameras, Blu-ray players, and antenna (off air) or
any device which outputs an HDMI source in scope with its broadcast resolutions. The Radio Frequencies it outputs can be used
with any Television with an RF tuner, STB, etc.
The H-THUNDER-4 units are widely used everywhere such as the mall, market hall, theatre, hotels, restaurants, stadiums, race
tracks, amphitheatres and etc. for advertising, monitoring, training and educating in company, schools, campuses, and
healthcare.
Convert your local HDMI signal into an RF signal, ready for distribution over coaxial cables. These modulators support all
cable and terrestrial standards.
Key features
HDMI input, capable of receiving all resolutions up to 1080p
MPEG2 video encoding
MPEG1 layer 2, AAC, and AC3 audio encoding
1 RF input, to by-pass terrestrial or cable signals
DVB-C/T/ATSC/ISDB-T RF output in every device, Modulation dynamic switching
Each channel supports 1x DVB-C/T/ATSC/ISDB-T output option
Control via web NMS, and easy updates via web
Bekijk gratis de handleiding van Thor H-THUNDER-4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thor |
| Model | H-THUNDER-4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6550 MB |
