Thor H-THUNDER-4 handleiding
Handleiding
Je bekijkt pagina 14 van 24
H-THUNDER-4
Tel:(800)521‐8467Email:sales@thorfiber.comhttp://www.thorbroadcast.com
3. 1 Login
The default IP of this device is 192.168.0.188. We can modify the IP through the front panel. Connect the PC and
the device with net cable, and use ping command to confirm they are on the same network segment.
E.G. the PC IP address is 192.168.0.190, we then change the device IP to 192.168.0.xxx (xxx can be 0 to 255
except 190 to avoid IP conflict). Use any web browser to connect the device with the PC by inputting the Encoder &
Modulator’s IP address in the browser’s address bar and press Enter.
It will display the Login interface as Figure-1. Input the Username and Password (Both the default
Username and Password are “admin”.) and then click “LOGIN” to start the device setting. Both fields of Username
and Password are case sensitive.
Figure-1
3.2 Operation
Summary
When we confirm the login, it displays the Summary interface as shown in Figure-2.
Bekijk gratis de handleiding van Thor H-THUNDER-4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thor |
| Model | H-THUNDER-4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6550 MB |
