Thor H-8ATSC-IP handleiding
Handleiding
Je bekijkt pagina 12 van 23
H-8ATSC-IP
Tel: (800) 521-8467 Email: sales@thorfiber.com http://www.thorbroadcast.com
3.2.3 Output Setting
Return to the main menu and press ENTER to enter into submenu 3, the LCD will display below
menus.
3.2.3.1 Tuner 1 Setting
Any one of the settings in 3.1-3.4, after you press enter will go into each individual submenu
and show you the correlated information whether it’s the IP address, Gateway or simply turn it on or
off.
In setting 3.5 This menu allows you to dictate the SPTS Para Program
These settings will allow you to Parse, Mux your SPTS, or Delete the Program all together.
3.2.4Network setting
Users can set the management port and service port by entering the system network
configuration menu. The sub-menu is shown as follows:
Note: The MAC address is the factory setting, and it’s unique.
Under the following submenus, these are parameters which can be set manually; press
“Up/Down” to choose this item. “Enter” and “Left/Right” to set the parameters. The system displays
the following pages.
►Parse Program Mux Program Select
Delete all Programs
►3.1SPTS Config 3.2 SPTS IP Addr
3.3 SPTS Gateway 3.4 SPTS Enable
►3.5 SPTS Para Prg
4.1 IP Address 4.2 Subnet Mask
4.3 Gateway 4.4MAC Address
4.1 IP Address
192.168.001.136
4.2 Subnet Mask
255.255.255.000
Bekijk gratis de handleiding van Thor H-8ATSC-IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thor |
| Model | H-8ATSC-IP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3956 MB |
