Thor ADW24PF handleiding
Handleiding
Je bekijkt pagina 8 van 39
ELECTRICAL REQUIREMENTS
WARNING
Electrical Shock Hazard
•
Electrically ground dishw
asher.
•
Connect ground wir
e to green ground connector in terminal box.
•
Do not use an extension c
ord.
•
Failure t
o follow these instructions can result in death, fire, or
electrical
shock.
This dishw
asher is designed for operation on an adequately wired
individual 120 V, 60 Hz, 15- or 20-amp fused electrical supply with copper
wire only. It is recommended that a time-delay fuse or circuit breaker is
used, and that a separate circuit serving only this appliance is provided. If
an outlet is used, the outlet should be placed in adjacent cabinet.
LOCATION REQUIREMENT
S
•
Install where dish
washer is protected from the elements. Protect
against freezing to avoid possible rupture of fill valve. Such ruptures
are not covered by the warranty. For winter storage information, see
“Storing” in the “Dishwasher Care” section.
•
Install and lev
el dishwasher on a floor that will hold the weight and in
an area suitable for its size and use.
WATER SUPPL
Y REQUIREMENTS
•
The water supply temperature should be 120°F to 150°F (49°C to
66°C).
•
The water supply must maintain water pressure between 20 and 80 psi
for sufficient flow.
7
OPERATING REQUIREMENTS
Bekijk gratis de handleiding van Thor ADW24PF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thor |
| Model | ADW24PF |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4027 MB |