Thor ADW24PF handleiding
Handleiding
Je bekijkt pagina 27 van 39
To refill the rinse aid dispenser
1.
Lift up the end tab of rinse aid
2. Fill the rinse aid dispenser with
Do not fill the reservoir above the full level indicator. Excess rinse aid
can overflow during the wash cycle.
WARNING
3. Press the rinse aid cover down
cover to open.
liquid rinse aid until full.
DO NOT
overfill.
NOTE:
Use the viewing port when filling
the rinse aid reservoir.
firmly to close.
To adjust the rinse aid setting
You can adjust the amount of the rinse aid released during the rinse
aid according to the following steps:
1. Close the door and power on the dishwashe
2. Within 60 seconds after step 1, press the CYCLES button more than��
seconds to enter into the setting mode, the rinse aid indicator will�
blink�� quickly.
3. Press the CYCLES button to select the proper setting according�
your�� using habits. The setting will change in the following sequence:�
d3->d4->d5->d1->d2->d3.
4. Without any operation in 5 seconds or press the Power button
to complete the setting and exit the setting mode.
26
Bekijk gratis de handleiding van Thor ADW24PF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thor |
| Model | ADW24PF |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 4027 MB |