Thomson CP202T handleiding
Handleiding
Je bekijkt pagina 19 van 84
- EN 19 -
5. Press “+” or “-” to select the ringing mode (“rd” = wake-up with radio, “bu” = wake-up
with buzzer), the radio will play continuously in “rd” mode; In “bu” mode, the alarm clock
automatically switches to STANDBY mode after 15 minutes.
6. Press “+” or “-” to select the snooze cycle (1-7 = every day, 1-5 = weekdays, 6-7 =
weekends).
ALARM ON OR OFF
1. Once the alarm is set and activated, the “AL1” and “AL2” symbols are displayed on the
screen. When the alarm rings, the corresponding symbols flash. Press the “snooze”
button once, the alarm is muted and goes off after 9 minutes of snooze time. Then it will
ring again.
2. In addition to touching the “snooze” touch button, pressing any other button once turns off
the alarm clock and the alarm symbol stops flashing until the alarm time on the following
day.
Nota: Alarm 1 is ringing or in sleep mode. When alarm 2 starts ringing, the ringing pattern is
based on alarm 2. Alarm 1 will be reset and will not ring again until the alarm time on the next
day.
If radio is selected as the ringtone, the station and volume will be based on the most recent
station and volume.
The radio plays until stopped by pressing any button.
LISTEN TO FM RADIO
1. Radio frequency range: 88.8MHz---108.0MHz.
2. Briefly pressing “M” turns the radio on and the display shows “ON” and the frequency.
When the radio is on, press and hold the “M” button for 2 seconds. The FM radio
automatically searches and saves stations (up to 70 stations) and stops at the first station
when the search is complete.
3. When the radio is on, press “+” or “-” to select the stored station.
4. When the radio is on, press the “AL1 VOLUME -/AL2 VOLUME +” button once to adjust
the volume. Press and hold them to quickly increase or decrease the volume. The device
automatically returns to clock mode if no buttons are pressed for 5 seconds. The volume
is set to L10 by default, and the volume range is from level 0 to level 15.
5. To change the saved radio station, when the radio is on, press and hold the “M” button
for 2 seconds to automatically search and save the new stations. This will replace any
previously saved stations.
6. Briefly press the “snooze” button to turn off the radio.
SETTING SLEEP MODE
1. In radio mode, press the “M” button once to activate sleep mode. The screen displays
“SL” and the default sleep time 05 (“05” represents 5 minutes). Continuously press “M” to
set the sleep time between 05, 15, 30, 45, 60, 75, 90 minutes or “OFF”.
2. When the set sleep period has elapsed, the radio will automatically turn off.
SETTING THE PROJECTOR FUNCTION
1. When the power is on, briefly press “projector” to activate the projection function and the
projector lamp will switch on;
2. Once projection is activated, press and hold the “projector” button and the projection
screen will rotate 180°.
Bekijk gratis de handleiding van Thomson CP202T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thomson |
| Model | CP202T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7786 MB |
