Thomson C850i handleiding
Handleiding
Je bekijkt pagina 18 van 96
- EN 18 -
Use
POWER SUPPLY
1. Connect the charging cable to a suitable USB power adapter (not supplied) and plug the
other end of the cable into the Type-C port on the rear of the product.
Note: For full compatibility you should be using a 30W PD AC adaptor to maximise
charging. Anything less will limit charging options.
Always use the supplied charging cable OR a suitable 30W compatible cable.
2. The product will now power on and enter normal working mode, ready for clock set up.
CONTROL FUNCTIONS
Time setting: 24-hour time.
Clock Setting
1. Press and hold the “Clock” button once to enter the clock setting mode. Then press the
+/- buttons to adjust the hours.
2. After adjusting the hours, press the “Clock” button once again to set the clock minutes.
Then press the +/- buttons to adjust the minutes.
3. After completing the setting for the minutes, press the “Clock” button once again to
complete the time setting.
Alarm Clock Settings
1. Press and hold the “Alarm” button once to enter the alarm clock setting mode. Then press
the +/- buttons to adjust the hours.
2. After adjusting the hours, press the “Alarm” button once again to set the alarm clock
minutes. Then press the +/- buttons to adjust the minutes.
3. After completing the setting for the minutes, press the “Alarm” button once again to
complete the Alarm setting for AL1.
You can see the AL1 icon on the right side of the screen.
To set AL2 follow the same instructions above.
To view and set the alarms, short press the alarm button. This will then briefly show the alarm
times set and display the alarm icons. If the Icon is on, the alarm is set. If the icon is off, the
alarm is disabled.
Alarm sound and snooze
When the alarm goes off, press any button to stop the alarm. The alarm sound will increase
slowly in volume during the alarm activation and will auto off after 3 minutes.
DISPLAY DIMMER
The brightness of the clock display screen can be manually adjusted to four levels. Press the
“touch” button to manually adjust the brightness of the digital display screen. After plugging
in, it defaults to a low brightness state. Each time you click the “touch” button, the brightness
will decrease by one level, and the clock display screen will cycle through 0 / 20 / 50 / 100%
brightness. If the display is set to 0%, it will revert back to minimum brightness (20%) when
alarm is ringing.
Bekijk gratis de handleiding van Thomson C850i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thomson |
| Model | C850i |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9028 MB |
