Thomann Cajon Construction Kit Junior handleiding
Handleiding
Je bekijkt pagina 19 van 32
Observe the drying time indicated on the packaging of the glue used.
3.4 Mounting the back panel
CAUTION!
Risk of injury to the hands
When drilling, sawing, assembling and screwing the individual parts,
pay attention to sharp edges on tools, screws and components.
Provide the back panel with a sound hole before starting the assembly.
To get the best sound, we recommend a round sound hole with a diameter of
approx. 12 cm. The optimum height for the centre of the circle is slightly above the
centre of the back panel.
The hole can be sawn with a fretsaw or jigsaw. To do so, drill a hole with a diameter
of approx. 10 mm at the edge of the indicated mark and insert the saw into the hole.
Inserting the sound hole
Assembly instructions
Cajon Construction Kit, Cajon Construction Kit Junior
19
Bekijk gratis de handleiding van Thomann Cajon Construction Kit Junior, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thomann |
| Model | Cajon Construction Kit Junior |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7893 MB |