Handleiding
Je bekijkt pagina 9 van 16
If you are unable to maintain the minimum distances mentioned in the table
below, protect with non-flammable material.
Table 4: Cabinetry protection dimensions
Model / Dimension
(mm)
① ② ③ ④
SHB980 200 200 500 670
SHB981 200 200 500 500
Cabinetry ventilation and protection dimensions
Maintain provision for the dispersal of unburnt gas beneath the appliance.
Ensure any gas drop hole is located away from the burners. The gas drop hole
must vent to the outside of the leisure vehicle.
2
1
3
1. Gas drop hole
2. Distance to non-combustible ma-
terial from the lowest point of
the hob (e.g. gas pipework, gas
taps, spark generator etc.
3. Front ventilation gap
Make sure the installation is according to the following, referring to the distances
indicated in the next table: Ventilation & protection dimensions
■
Apply a minimum distance ② from the lowest point of the Hob, in all scenarios. And
where the underneath of the Hob is exposed, then a non-combustible heat shield at
point 2 is mandatory.
■
Create a gas drop hole ①, which must vent to the outside of the leisure vehicle.
■
It is strongly recommended to cut a slot in the cabinet under the front of the worktop
③, to dissipate heat from under the appliance.
Table 5: Ventilation and protection dimensions
① in mm ② in mm ③ in mm
25 - 50 30 8 x 100
To ensure correct operation and prevent changes in air pressure affecting
appliance performance, the appliance must be built into a securely fixed self-
contained cabinet which is not connected to externally vented chambers in
adjacent furniture, other than the gas drop hole described above.
9
Bekijk gratis de handleiding van Thetford Topline 980 Hybrid, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thetford |
| Model | Topline 980 Hybrid |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 1830 MB |
