Handleiding
Je bekijkt pagina 12 van 24
Preparations T1090E and T1090EX
Insulation
Installing insulation material is strongly recommended. It will considerably reduce the
emitted noise and protects against heating up from outside the vehicle.
■
Install insulation on the back of the chassis.
Top model Floor model
The insulation material should be left exposed and not covered by panelling to
prevent unwanted reflection of noise.
■
Ensure that the insulation material is able to handle the temperatures and the
mechanical loading expected during normal use.
■
Ensure that the insulation material does not diminish the minimal ventilation
dimensions of the air ducts. Glued insulation material might detach over time and
block the airways. Overheating of the system might be a result.
For the correct type of insulation, it is advised to use a polyurethane noise
absorption panel with open cell structure, or similar.
■
Make a cut-out in the roof panel, exposing the insulation material.
■
Seal any gaps between furniture and chassis to prevent noise emission.
Separate control panel installation
For T1090E: the control panel can be installed in a separate place.
For T1090EX: the control panel must be installed in a separate place.
12
Bekijk gratis de handleiding van Thetford T1000E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thetford |
| Model | T1000E |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 2749 MB |