Handleiding
Je bekijkt pagina 8 van 96
en-us Installation and connection
8
¡ Installation material
¡ Installation instructions
¡ User manual
¡ Explanation of the limited product warranty
¡ Warranty enclosure
1
¡ Energy label
¡ Information on energy consumption and noises
¡ Information about HomeConnect®
4.2 Criteria for the installation location
WARNING
If the appliance is in a space that is too small, a leak in the
refrigeration circuit may result in a flammable mixture of
gas and air.
▶ Only install the appliance in a space with a volume of at
least 35ft
3
(1m
3
) per 0.3oz (8g) refrigerant. The
amount of refrigerant is indicated on the rating label.
→"Appliance", Fig.
1 /
12
,
Page10
The weight of the appliance from factory may be up to
355lbs (160kg) depending on the model.
The subfloor must be sufficiently stable to bear the weight
of the appliance.
The surface must be level.
Over-and-under and side-by-side installation
If you want to install 2 refrigerating appliances one over
the other or side by side, you must maintain a clearance of
at least 150mm between the appliances. Selected
appliances can be installed without a minimum clearance.
Ask your dealer or kitchen planner about this.
4.3 Installing the appliance
▶
Install the appliance in accordance with the enclosed
installation instructions.
4.4 Preparing the appliance for first use
1.
Remove the information material.
2. Remove the protective film and transit bolts, e.g.
remove the adhesive strips and cardboard.
3.
Clean the appliance for the first time. →
Page22
4.5 Connecting the appliance to the drinking
water connection
Requirements
¡ A shut-off valve must be installed on the water
connection and be freely accessible following
installation of the appliance.
¡ Ensure that the water coming from the water connection
is potable.
1. Rinse the drinking water connection thoroughly until the
drinking water is no longer cloudy and contains no
deposits.
If the drinking water is still cloudy or contains deposits,
install an external water filter system.
2. Install the drinking water connection according to the
enclosed installation instructions.
4.6 Connecting the appliance to the
electricity supply
1.
Insert the non-heating appliance plug of the power cord
into the appliance.
2. Insert the power plug of the appliance's power cord in a
socket outlet with grounding nearby.
The connection data of the appliance can be found on
the rating plate.
→"Appliance", Fig.
1 /
12
,
Page10
3. Check the power plug is inserted properly.
a The appliance is now ready to use.
1
Not in all countries
Bekijk gratis de handleiding van Thermador T36FL810NS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thermador |
| Model | T36FL810NS |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 15194 MB |