Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 84 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
7.2 The scenes
7.2.1 Principle
The current status of a channel, or a complete MIX system
can be stored and retrieved as required at a later point via the scene function.
That applies to switching, blinds and dimming channels.
Each channel can participate simultaneously in up to 8 scenes.
This requires permission to access scenes for the relevant channel via parameter.
See Activate scenes parameter and Scenes parameter page.
The current status is allocated to the appropriate scene number when a scene is saved.
The previously saved status is restored when a scene number is called up.
This allows a MIX system to be easily associated with each chosen user scene.
Table 51: Permitted scene numbers
Series
Device
Supported scene numbers
MIX (order no. 4910xxx)
DME 2 S
1 .. 8
JME 4 S
RME 4 S / C-load
MIX2 (order no. 4930xxx)
RMG/RME 8 S
1 .. 64
RMG/RME 4 I
DMG 2 T/DME 2 T
RMG 8 T/JME 4 T
RMG 8 T/RME 8 T
The scenes are permanently stored and remain intact even after the application has been
downloaded again.
See All channel scene statuses parameter on the Scenes parameter page.
Version: May-14 (Subject to change) Page 84 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
