Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 83 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
7 Appendix
7.1 Manual mode
This mode can be set or reset with the manual button or via object 78 (manual).
The object can be locked on the General parameter page.
Whether manual mode should be ended after the expiry of a set time can also be defined.
7.1.1 With blinds channels
The positions of the hangings will be frozen.
All non-safety related bus telegrams are disabled, i.e. only the safety commands (on objects 8,
244, 245, 246, 248, 249) can still be executed.
Any current operating commands will be terminated when the specified position or the end
position is reached. The condition will be reported to the associated object.
After cancelling manual mode, the bus telegrams work again. Bus events already received
will not be obtained later.
Manual mode will be reset after power returns.
Version: May-14 (Subject to change) Page 83 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
