Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 80 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
6.5 Blinds control with sun position tracking and
frost alarm (blinds actuator)
Channel 1 is set as blinds actuator.
A push button, which is connected with the binary input TA4, sends the up/down and
step/stop commands. The weather station Meteodata 140 controls the slat tilt in accordance
with the sun position.
This helps achieve optimal light incidence without direct solar radiation.
The blinds should be raised when there is a danger of frost. The object Central safety frost is
involved in this.
6.5.1 Devices:
• RMG 8 T (Order no. 4930200)
• Meteodata 140 (order no. 1409200)
• TA 4 (Order no. 4969204)
6.5.2 Overview
Figure 5
From top to bottom:
• The weather station: sends the telegrams for positioning of the blinds according to the
position of the sun.
If no shading is required, the blinds will be raised (obj. 60).
• The push button interface: operation by the user (up/down, step/stop)
Version: May-14 (Subject to change) Page 80 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
