Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 67 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
5.3.6.8 The "Positions via 1 bit" parameter page
This page will only be shown when the Sun protection function is not activated on the
Configuration options parameter page.
3 individual preallocated positions can be called up using 1-bit objects (Obj. 40, 41, 42).
Table 30
Designation
Values
Description
Position A
Response when receiving
a 1
Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
Preset 6
Preset 7
Preset 8
Approach a preset position.
See Presets parameter page.
Top end position
Lower end position
Approach an end position.
Response when receiving
a 0
Preset 1
Preset 2
Preset 3
Preset 4
Preset 5
Preset 6
Preset 7
Preset 8
Approach a preset position.
See Presets parameter page.
Top end position
Lower end position
Approach an end position.
No response
Do not react.
Update (height/slat)
Approach last received position.
Position B
Response when receiving
a 1
See above
Desired drive height or slat position for
position B
Response when receiving
a 0
See above
Position C
Response when receiving
a 1
See above
Desired drive height or slat position for
position C
Response when receiving
a 0
See above
Version: May-14 (Subject to change) Page 67 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
