Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 63 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
5.3.6.7 The "Scenes" parameter page
This page appears when the Scenes are activated on the Configuration options parameter
page.
Each channel can participate in up to 8 scenes.
Each of these 8 scenes reacts to a specific, freely configurable scene number.
When the associated number is called up, the taught in position will be approached.
Each of the 8 scenes is preconfigured with a position from the Presets page.
When a scene number that has not been taught in is received, this preset position will be
called up.
Table 29
Designation
Values
Description
Lock telegram for scenes
Lock with ON telegram
0 = Enable
1 = Lock
Lock with OFF telegram
0 = Lock
1 = Enable
Note: With this setting the scenes are
always locked immediately after reset or
download.
All channel scene
statuses
Overwrite on download
A download deletes all scene memories
in a channel, i.e. all previously taught in
scenes.
When a scene number is called, the
channel assumes the configured Status
after download (see below).
See appendix: Teach in scenes without
telegrams
Unchanged after download
All previously taught in scenes are
saved.
However, the scene numbers the channel
should react to can be changed (see
below: Channel reacts to).
Participation in central
scene object
No
yes
Should the device react to the central
scene object?
Version: May-14 (Subject to change) Page 63 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
