Theben RMG 8 T KNX handleiding
Handleiding
Je bekijkt pagina 6 van 87
MIX 2 series RMG 8 T / RME 8 T actuators
3.1 Operation
Each channel can be switched independently of all parameters using the buttons on the
device. A status LED shows the current switching status or the current direction of movement.
The channels can be configured as a switch actuator as well as a blinds actuator.
• If channels C1, C2, C3, or C4 are defined as switch actuator, C5 to C8 are also
available as switch actuator channels.
• For blinds or roller blinds function, 2 channels are required per drive.
Table 2: Channel assignment and direction of movement for the blinds actuator*
First drive
Second drive
Third drive
Fourth drive
▲ C1
▲ C2
▲ C3
▲ C4
▼ C5
▼ C6
▼ C7
▼ C8
*These directional information are only valid if the parameter
direction of movement of drives = normal is set.
All bus telegrams are ignored with manual operation switched on (manual button) and the
channels are exclusively to be operated via the buttons.
Telegrams on the objects Safety and Priority on safety are still being executed.
Mains voltage is required for the functioning of the buttons and LEDs, bus voltage or bus
module are not required.
Version: May-14 (Subject to change) Page 6 of 87
Bekijk gratis de handleiding van Theben RMG 8 T KNX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Theben |
| Model | RMG 8 T KNX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11185 MB |
