The T.bone free solo PT 600 handleiding
Handleiding
Je bekijkt pagina 9 van 48
NOTICE!
Damage to the external power supply due to high voltages!
The device is powered by an external power supply. The external power supply can be damaged if it is operated with the incorrect
voltage or if high voltage peaks occur. In the worst case, excess voltages can also cause a risk of injury and res. Make sure that the
voltage specication on the external power supply matches the local power grid before plugging in the power supply. Only operate
the external power supply from professionally installed mains sockets that are protected by a residual current circuit breaker (FI).
Ensure that the power cord plug is easily accessible at all times if it is the only device to safely disconnect the device from the mains
supply. As a precaution, disconnect the power supply from the power grid when storms are approaching or it the device will not be
used for a longer period.
NOTICE!
Damage to the device due to use of unsuitable external power supplies!
If the device is operated with an unsuitable external power supply, the device can be damaged by overvoltage or incorrect polarity.
If things go badly, using an unsuitable power supply can also cause a risk of injury and re. Only use the external power supply
designated for the device or an equivalent external power supply with identical parameters. If in doubt, compare the voltage speci‐
cations on the external power supply and the polarity (+/-) with the specications in this manual and printed on the device. Voltage
and polarity must always match.
NOTICE!
Damage to the device if operated in unsuitable ambient conditions!
The device can be damaged if it is operated in unsuitable ambient conditions. Only operate the device indoors within the ambient
conditions specied in the “Technical specications” chapter of this user manual. Avoid operating it in environments with direct sun‐
light, heavy dirt and strong vibrations. Avoid operating it in environments with strong temperature uctuations. If temperature uc‐
tuations cannot be avoided (for example after transport in low outside temperatures), do not switch on the device immediately.
Never subject the device to liquids or moisture. Never move the device to another location while it is in operation. In environments
with increased dirt levels (for example due to dust, smoke, nicotine or mist): Have the device cleaned by qualied specialists at reg‐
ular intervals to prevent damage due to overheating and other malfunctions.
Safety instructions
free solo PT 600/823/863 MHz
9
UHF Wireless System
Bekijk gratis de handleiding van The T.bone free solo PT 600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | The T.bone |
| Model | free solo PT 600 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2843 MB |