The T.bone free solo PT 600 handleiding
Handleiding
Je bekijkt pagina 27 van 48
ð
The display shows that the receiver is being tuned to the new frequency. After a few
seconds, the display indicates the default state.
1. Open the transmitter to expose the infrared sensor.
2. Press [ADL]
ð
The [IR] display ashes.
3. Hold the infrared sensor of the transmitter near the infrared interface of the receiver
within ten seconds.
ð
When synchronisation has been successfully completed, the [IR] display stops
ashing.
ð
After three seconds, the display indicates the default state.
1. Press [SET] repeatedly until the [AF] area ashes on the display.
2. Use the arrow buttons to set the desired value.
ð
The current value is displayed.
3. Press [SET] to conrm the selection.
ð
After three seconds, the display indicates the default state.
Synchronising transmitter and
receiver
Setting the output level
Operating
free solo PT 600/823/863 MHz
27
UHF Wireless System
Bekijk gratis de handleiding van The T.bone free solo PT 600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | The T.bone |
| Model | free solo PT 600 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2843 MB |