The T.bone free solo PT 600 handleiding
Handleiding
Je bekijkt pagina 22 van 48
1 [GP] | Displays the selected frequency group.
2 [CH] | Displays the selected channel.
3
| Indicates that the receiver is locked to prevent accidental changes.
4
| Indicates that the receiver is not receiving a signal, e.g. because the transmitter is disabled, the connection is
interrupted or the channel is currently changing.
5 [A/B] | Indicates which of the two antennas is currently being used for signal transmission.
6 [SQ] | Shows the set squelch level for the radio signal.
If the set value of the squelch is not reached, no sound is output. Setting the squelch too high can lead to dropped
signals. Setting the squelch too low can cause unwanted noise.
7 [RF] | Shows the level of the received radio signal.
8
| Indicates the battery status of the transmitter from which the receiver is currently receiving a signal.
9 [AUTO] | Shows that an automatic search is running to nd a free channel.
10 [FREQUENCY] | Displays the frequency assigned to the set combination of frequency group and channel.
11 [IR] | Indicates that an infrared signal is being received.
12 [AF] | Shows the level of the audio signal.
Connections and controls
22
free solo PT 600/823/863 MHz
UHF Wireless System
Bekijk gratis de handleiding van The T.bone free solo PT 600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | The T.bone |
| Model | free solo PT 600 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2843 MB |