Thames & Kosmos WindBots: 6-in-1 Wind-Powered Machine handleiding

Niet gecategoriseerd

Thames & Kosmos

56 pagina's

PDF beschikbaar

Handleiding

THE MODULES

Before you start building the models, you will assemble the

wind machine with hand crank and the various modules.

These modules make it easier for you to build the models

later, and they are useful when you want to convert one

model into another because the modules do not have to be

disassembled.

DISASSEMBLY

If you have built a model and then want to build another model, you will likely need to disassemble

the first model, as parts you have used may be needed for the new model. For disassembly, you can

simply follow the assembly steps in reverse order. The special part D28 can be helpful. Learn how

to use it on the following page.

SCREWS

There are screws included in the set for assembling the

modules. To tighten them, you will need a small Phillips-head

screwdriver (preferably size PH1). Make sure that you tighten

the screws all the way down. Loose screws may lead to

malfunctions.

WIND

The most important thing your models need to move is wind. You have different options to

generate wind. A wonderful option is to bring your models outside and let them be

strong or too weak.

You can also use the included wind machine. Just aim the fan

of the wind machine at the fan in your model and

turn the crank.

Of course, you can also blow air from

your lungs, but be careful because

this can make you dizzy.

ASSEMBLY

USEFUL TIPS

Bekijk gratis de handleiding van Thames & Kosmos WindBots: 6-in-1 Wind-Powered Machine, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.