Thames & Kosmos Wind Racer handleiding
Handleiding
Je bekijkt pagina 5 van 20
4
Insert the clear tube for the mast through the
3-hole rod and into the third wheel unit. (The tube
may be already inserted into the sail.)
5
Slide the sail onto the
mast if it is not already
there. Insert the other
clear tube for the boom
through the sail’s rear
holes and then into the
two rear wheel units.
6
The sail car is done! Follow the
instructions below to test it.
Testing the sail car
You can test your sail car outside on a breezy day or inside with the more
controlled airflow from an electric fan. Position the car facing away from
the direction from which the wind is blowing and let it go. The moving
particles in the air will hit the surface of the sail. The particles push
on the sail, accelerating (increasing the speed of) the sail and the car
attached to it. The car moves! At the same time, the sail pushes back on
the air particles, decelerating (decreasing the speed of) the air particles.
But because there is so much wind, this doesn’t stop the wind!
This is called downwind sailing. The physics of upwind sailing is
described on page 11.
3
Bekijk gratis de handleiding van Thames & Kosmos Wind Racer, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Wind Racer |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5764 MB |
