Thames & Kosmos Wind Racer handleiding
Handleiding
Je bekijkt pagina 15 van 20
Testing the wind direction
To use your wind direction indicator, set it outside on a smooth, hard
surface. Make sure the wheels are angled so that they can turn in a circle
around the center pivot point. Let it go and watch how it spins around
and points to the direction the wind is coming from.
This model works just like a wind vane. Wind hits the sail and pushes
it leeward. The model just rotates around the pivot point because the
friction between the rod and the ground prevents the whole model from
moving. When the sail moves leeward, the tube points windward!
4
Slide the sail onto the mast
tube. Attach the two wheel
units to the end of the curved
flats rods through the holes
in the bottom of the sail.
Make sure the wheel units are
angled so that they can turn
in a circle around the center
pivot point, the 3-hole dual
rod.
5
Your model is done! Use the
wind direction indicator as
described below.
Center pivot point
13
Bekijk gratis de handleiding van Thames & Kosmos Wind Racer, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Wind Racer |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5764 MB |
