Thames & Kosmos Ultra Bionic Blaster handleiding

Niet gecategoriseerd

Thames & Kosmos

24 pagina's

PDF beschikbaar

Handleiding

15 16

click

Top view

Bottom view

Press the metal

rod through the

holes as shown.

Make sure the

sticky side faces up.

Assemble in order.

Press

A13 in all

the way.

Compress the spring

with A16 and align the

holes of A16 and A17.

Pull A16 back with your

finger. It should spring

back.

Press A14 all the way down

until you hear a click.

Apply oil to the

outside of the

O-ring.

Apply oil all

around the

groove of A15

as shown.

A13

A14

A15

A16

A17

B12

B14

B17

large O-ring

A16

B14

A15

small

spring

A16 is very

small. If you

can’t find it,

look inside

of the other

parts in the

bag.

The two tabs

of A13 fit into

the slots of

A15.

IMPORTANT!

Make sure this

hole faces up.

Press down so that

A16 hooks around the

metal rod.

Press subassembly D

all the way in, aligning

the four notches into

the grooves of A10.

This tab slides

into the slot.

1. Apply oil to the

groove as shown.

2. Add the medium

O-ring.

1. Apply oil to A18 as shown.

2. Place the small O-ring

onto A18.

3. Place A18 as shown.

Apply oil to

the O-ring.

Apply oil and place

the small O-ring in

the indent around

the open hole in A18.

A10

A12

B11

B15

B16

small O-ring

Make sure the

flat sides of

A10 face up.

A16

B13

1. Add the large spring (B11).

2. Slide A12 all the way in.

Flip over.

medium O-ring

A18

large spring

Hold A12

down as

you secure

it with four

screws.

Pull up on

subassembly E to

make sure that it

is securely

attached to

subassembly D. It

should not come

off.

Assembling the Ultra Bionic Blaster

Bekijk gratis de handleiding van Thames & Kosmos Ultra Bionic Blaster, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.