Thames & Kosmos Sewing Circuits handleiding

Niet gecategoriseerd

Thames & Kosmos

28 pagina's

PDF beschikbaar

Handleiding

Like this: Not this:

What shape will your glow-bot have?

Is it round or angular? Does it have

arms and legs and a head with a neck?

Or does it look more like a block of

wood?

Spend a little time thinking about

which robot parts you will want

to decorate with LED lights: eyes,

antennas, or maybe a robot heart?

Your kit comes with red and green

LEDs. You can use one or two of them

for your robot.

Your glow-bot must have at least one

body part that sticks out a little and

has no LED — for example, an arm or

an antenna. That’s because you will

have to sew a pushbutton component

onto a body part that sticks out, so

you can switch the LED on and off.

Draw your sketch inside the frame on

page 4! Fill the space as completely

LeT’s GeT

GLOWING

Your glow-bot pattern

as possible, because you don’t want

your glow-bot to be too small.

It’s best to take a battery holder, a

pushbutton, and one or two LEDs and

lay them on your sketch to make sure

that they have enough room. Also,

be sure not to make the body parts

too thin, or it will be difficult to sew

them later on.

Your glow-bot can look scary or

friendly, and it can have several eyes

or just one. He can also have a signal,

a warning flasher, and a variety of

buttons. Let your imagination run

free!

When you are happy with your

drawing, cut it out with a pair of

scissors.

Bekijk gratis de handleiding van Thames & Kosmos Sewing Circuits, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.