Thames & Kosmos Robotics Workshop handleiding

Niet gecategoriseerd

Thames & Kosmos

68 pagina's

PDF beschikbaar

Handleiding

There are six primary functional components in

this kit that enable the robots to work:

A. The CB1 core controller connects to the app

on your tablet via a wireless Bluetooth

connection, and provides power to the motor

units via wires. It connects to the sensor units

to transmit sensor input back to the program.

The core controller also contains a

microphone that can be used to detect

sounds, a speaker to make sounds, and a

rotary knob.

B. Motor units 1 and 2 connect to axles and

motor shafts to turn gears and wheels,

activating your models. They are powered by

the core controller.

C. The ultrasonic sensor sends out ultrasound

waves and “listens” for them to bounce oﬀ of

objects. It gives this information to the app,

enabling it to estimate the distance to the

objects.

D. The light sensor is able to detect changes in

the amount of light shining on the sensor. It

then sends this information to the app.

E. The touch sensor, like your ﬁngers, is able to

sense if it has come into contact with an

object. It then sends this information to the

app.

F. CB1 Blockly: The mobile app (or desktop PC

application) is the “brain” of your robotic

models. It uses the feedback from the sensors

along with programmed instructions to

control the models via the core controller.

These six elements, in combination with all the

mechanical parts — rods, gears, axles, frames,

and so on — allow you to build and program

mechanical robots that can sense and respond

to their surroundings.

First, follow the assembly instructions starting

on page 12 to build one of the models. Make

sure you have inserted the baeries correctly

according to the baery information on page 2.

Now you can connect the tablet to the model

via the free app. Instructions to download and

use the app start on page 8.

D E

LED 2

Microphone

USB port

LED 1

Ultrasonic sensorMotor 4

Light sensorMotor 3

Touch sensor 1Motor 2

Touch sensor 2

Control knob

DC 5V input

(2.5A or above

recommended)

Motor 1

Power switch

CB1 Blockly

Programming the Robots

GETTING STARTED

Bekijk gratis de handleiding van Thames & Kosmos Robotics Workshop, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.