Thames & Kosmos Robotics Workshop handleiding

Niet gecategoriseerd

Thames & Kosmos

68 pagina's

PDF beschikbaar

Handleiding

PROGRAMMING

SAMPLE PROGRAM FOR THE TURTLE ROBOT

Use this program to make the ultrasonic turtle robot walk forward. Build the robot and test out

the program. Then try modifying the program so that the turtle robot is able turn left or right.

Try building a simple maze for your turtle robot using objects such as books or paper cups. Then

write a program to drive the turtle robot through the maze without bumping into anything.

This program and all of the programs in this manual are preloaded in the app in the Load Demo

Code menu.

Loop

The green block is what is known as a loop. A

loop in a program repeats the instructions

within it over and over again, sometimes

inﬁnitely! This loop will repeat the blocks that

are within the green bracket 10 times. Loops

are used to simplify code so that you do not

have to rewrite the same instructions over and

over again. Imagine writing these steps 10

times!

This blue block of code tells the robot to go

forward by turning on motor 1 and motor 2.

The motors need to turn in opposite directions

to move the robot forward because of the way

that the gears connect to the wheels in the

model. These blocks of code are repeated by

the loop 10 times.

How would you modify this

program to make the robot

turtle turn left or right?

Because this block is outside of the loop, it

only repeats once. This block tells the motors

to turn oﬀ.

Scan this QR code to view

online tech support videos

of the models in action.

Bekijk gratis de handleiding van Thames & Kosmos Robotics Workshop, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.