Thames & Kosmos Robotics Smart Machines: Super Sphere handleiding

Niet gecategoriseerd

Thames & Kosmos

64 pagina's

PDF beschikbaar

Handleiding

PROGRAMMING MODE

WRITING A PROGRAM

When you are ready to write your ﬁrst program, you

can refer to the step-by-step instructions below to

do so.

1. Tap the programming arrow buon (A) to enter

the programming mode. Choose a blank program

(Program 8 starts out blank).

2. The programming screen appears.

3. Press the plus sign “+” buon (B) in one of the

sequences to add a command to that sequence.

4. The commands menu (C) pops up. You can select

between three types of commands:

• Choose motors to add motor commands.

• Choose notes to add sound commands.

• Choose rest to add a pause command.

Or press the red X buon to exit the commands

menu.

Continued on next page >>>

TROUBLESHOOTING THE

SENSOR CONNECTION

If the sensor connection isn’t working:

››› Disconnect and then reestablish the

Bluetooth connection.

››› Make sure the sensor cable is securely

plugged into the baery box.

››› Exit the program you are in and

relaunch it.

Programming the Robots

Bekijk gratis de handleiding van Thames & Kosmos Robotics Smart Machines: Super Sphere, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.