Thames & Kosmos Physics Solar Workshop handleiding

Niet gecategoriseerd

Thames & Kosmos

68 pagina's

PDF beschikbaar

Handleiding

1 2

1. Insert the engine shaft (19) into the solar engine (24). The short end

of the shaft goes in the engine block. Then mount a small sprocket

wheel (9) on the shaft.

2. The solar engine is mounted on a long frame (2). The engine’s

anchor pins go in the second, fourth, and sixth holes from the right.

3. From the other side, attach a second long frame (2) to the engine.

Press both frames together ﬁrmly, so the assembly is stable.

4. The anchor pins on the long frames serve to attach another long

frame (2), which you mount vertically.

5. Another long frame serves to provide additional strength. This one is

set right on top of the two long frames with the engine.

6. Now we’ll prepare the axles. Take two long axle shafts (16) and insert

a small gear wheel (8) over the short end of each one.

7. Push the two axle shafts through the outer holes of the frames at the

bottom. The gear wheels should be on the side away from the engine

shaft.

8. Insert a small gear wheel (8) and a medium sprocket wheel (10) on

the other side. The teeth of the sprocket wheel should mesh with those

of the wheel on the engine.

Bekijk gratis de handleiding van Thames & Kosmos Physics Solar Workshop, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.