Thames & Kosmos Pepper Mint in the Great Treehouse Engineering Adventure handleiding

Niet gecategoriseerd

Thames & Kosmos

36 pagina's

PDF beschikbaar

Handleiding

Set the switch on the baery compartment to

“OFF.” Now

you need to be especially careful

again: The baery compartment has two

wires aached to it — a red one and a black

one. Fasten the red wire onto the front spring

on the left platform, and the black wire onto

the rear spring. Do this by bending the spring

to one side and tucking the metal

end of the

wire into the gap that appears in the spring.

Check one last time to make sure all the LEDs

are hanging correctly and that the red wire is

tucked into the front springs. Everything in

the right place? Now slide the baery switch

to “ON!”

You don’t need to worry about touching the

wire, the thread, the springs, or the LEDs.

The electrical current is so small that

nothing will happen. But don’t touch power

outlets, uncovered wires, or electrics around

your home — that can be extremely

dangerous.

WHAT’S HAPPENING

Your string of lanterns forms an electrical circuit. Instead of using wires and cables, the

electricity ﬂows along the conductive thread, which includes metal ﬁbers. By hanging the

LEDs over the conductive thread, you are connecting the two pieces of thread so that the

electrical current can ﬂow and make your LEDs light up.

You can tuck away the baery compartment

underneath, either in the tree trunk or behind

the main platform. Slide the switch to “OFF”

when you’re not using the lanterns, or pull

the wires out of the springs.

Tip!

Lanterns

and the

Bekijk gratis de handleiding van Thames & Kosmos Pepper Mint in the Great Treehouse Engineering Adventure, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.