Thames & Kosmos Motors & Generators handleiding
Handleiding
Je bekijkt pagina 6 van 52
→
WHATS HAPPENING
HERES HOW
1. Insert the gear with the drive wheel (a
small toothed gear in the middle) into
the center hole.
2. Now, insert the gear with the crank
hookup into the lower hole.
Use the felt-tip pen to make a mark in
the same location on both large gear
wheels, as shown in the illustration.
Now carefully turn the lower gear
wheel.
3. Count the turns on the small gear wheel
and mark one of the teeth as the “start-
ing point.” Rotate the lower wheel one
turn.
When you do that, how many times does
the small gear wheel turn?
Transmission
needed
YOU WILL NEED
→ engine block
→ two large gears
→ felt-tip pen
The greater the difference in the
number of teeth, the higher the
transmission’s rotation ratio. A lot
of gear systems use this principle
to convert slow rotations into fast
ones, or vice-versa.
EXPERIMENT
Bekijk gratis de handleiding van Thames & Kosmos Motors & Generators, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Motors & Generators |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25232 MB |
