Thames & Kosmos Do-it-Yourself UFOs handleiding
Handleiding
Je bekijkt pagina 12 van 20
10
Deploying the
space antenna
You will need:
Silver cardboard, small cotton ball, wire,
pencil, hobby glue, scissors, wire cutter
or combination pliers, pin, compass or
drinking glass, ruler
Here’s how:
1
Use the compass or glass to help you
draw a circle about 5.5 cm in diameter
on the rear side of the silver
cardboard. Then cut a spiral out of
the circle.
2
Glue the spiral onto the cotton ball.
Next, make a wire coil. Have an adult
help you cut the wire! At one end of
the coil, leave a straight section of
wire about 2 cm in length, and at the
other end leave a straight section
about 1 cm in length.
3
Use the pin to puncture a hole in the
edge of the deep box piece. This is
where you will insert the shorter end
of the wire coil, and then bend the
end and press it firmly in place
against the box from the bottom.
Stick the cotton ball onto the longer
end of the coil. Use a little hobby glue
to help secure the wire to the ball.
1
2
3
Bekijk gratis de handleiding van Thames & Kosmos Do-it-Yourself UFOs, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Thames & Kosmos |
| Model | Do-it-Yourself UFOs |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20240 MB |
