Thames & Kosmos Chemistry C500 (Version 2.0) handleiding

Niet gecategoriseerd

Thames & Kosmos

52 pagina's

PDF beschikbaar

Handleiding

→ WARNING! Only for use by children aged 10 years and

older. Instructions for parents or other supervising

adults are included and have to be observed. Keep

the packaging and instructions as they contain

important information.

→ For some experiments, you will need a 9-V type 6LR61

square battery, which could not be included in the kit

due to its limited shelf life. Press the battery clip

equipped with red and black wires onto the battery.

→ Have an adult check your experimental setup before

performing the experiment.

→ Non-rechargeable batteries are not to be charged.

They could explode.

→ Rechargeable batteries are only to be charged under

adult supervision.

→ Rechargeable batteries are to be removed from the

toy before being charged.

→ Exhausted batteries are to be removed from the toy.

→ Dispose of used batteries in accordance with

environmental provisions, not in the household

trash.

→ The supply terminals of the battery clip are not to be

short-circuited: Neither the battery wire contacts nor

the wires connected to them should touch each other.

Make sure there is no unintended short circuit due to

conductive metal objects, such as coins or a keychain. A

short circuit can cause the wires to overheat and the

battery to explode.

→ Don’t throw batteries into the ﬁre and don’t store them

near heat sources.

→ Avoid deforming the batteries.

→ Never perform experiments using household current.

You know that you should never insert any objects into

the wall socket holes. The high voltage can be extremely

dangerous or fatal!

→ Don’t use any voltage source other than the speciﬁed

battery, including a power supply unit.

→ After you are done experimenting, remove the battery

clip from the battery.

→ Warning! Do not manipulate the protective device in the

battery compartment (PTC). This could cause

overheating of wires, eruption of batteries and

excessive heating.

Safety for experiments with batteries

–

ophthalmic spectacles may transmit impacts, thus

creating a hazard to the wearer. If protection against high-

speed particles at extreme temperatures is required then

the selected eye protector should be marked with the

letter T immediately after the impact letter, i.e. FT, BT, or

AT. Otherwise the eye protector should only be worn and

used at room temperatures.

Accessories: No accessories are available for this product.

Storage: Store in a dry and dust free place at room

temperature.

Cleaning: Clean with clear water and household detergent.

(Do not use solvents!) Avoid strong scrubbing as it can

cause scratches.

Disinfection: Product can be disinfected with all regular

commercial disinfectants.

Disposal: Pay attention to national regulations when

disposing.

Length of usage: Do not use longer than 5 years after

purchase date.

Warnings: Dispose of the goggles immediately if damaged.

Only use eye protection lenses with optical class 1. Do not

repair damaged safety goggles.

Limitations of use: These safety goggles in particular are

not suitable for high-speed particles (e.g. cartridge tools),

laser beam, temperatures above 55 °C, stray light arches,

fusion metals, infectious substances, or organisms.

Declaration of Conformity: A Declaration of Conformity

according to Regulation (EU) 2016/425 on PPE and the

Directive 2001/95/EC on general product safety is available

for this product on the following web address: http://

thamesandkosmos.com/declarations/declaration-717019.

pdf

Instructions for use for the safety goggles (Art.-Nr. 717019)

Manufacturer Frame: Georg Schmerler GmbH & Co. KG /

Reitweg 7 / 90587 Veitsbronn / Germany

Manufacturer Lens: IPB NV / Steenovenstraat 30 / 8790

Waregem / Belgium

Certifi ation Offi e: ECS GmbH – European Certifi ation

Service / Hüttfeldstr. 50 / 73430 Aalen, DE / Germany /

Notiﬁed Body Number: 1883

GSF – Safety goggles comply with the Regulation (EU)

2016/425 on personal protective equipment (PPE), are

design tested, and bear the CE symbol. The Model 610 in

this kit is suitable for protection against mechanical

dangers.

Identiﬁcation of the frame:

GSF = Code letter of manufacturer

166 = Number of the standard

S = increased robustness

CE = EC Conformity symbol

Identiﬁcation of the safety lenses:

IPB = Code letter of manufacturer

1 = Optical class

S = increased robustness

If frame and lens have differing certiﬁcation marks in

regards to S, F, B, or A, the lower of the two applies.

Wearers with extremely sensitive skin may experience

allergic reactions upon contact with some materials. There

are no spare parts or additional components available for

this model. If damaged please discard the safety goggles

and discontinue use. Eye protectors used for protection

against high-speed particles that are worn over standard

Instructions for using the safety glasses

SAFETY INFORMATION

Bekijk gratis de handleiding van Thames & Kosmos Chemistry C500 (Version 2.0), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.