Texas El-Tex 1500 handleiding
Handleiding
Je bekijkt pagina 13 van 32
13
8. Maintenance and storage
Clean all grass and soil from machine after each use.
If not to be used for an extended period, coat all metal parts in grease to avoid corrosion
and rust.
Use original spare parts only
9. Troubleshooting
Problem Casue Solution
Motor will not start: No power Check power supply and cables
Defective safety button Contact authorised workshop
Overheating cutout
activated?
a. Cut shallower
b. Remove any blockages
c. Soil too hard. Change depth
and run slowly backwards and
forwards several times.
Do not restart for 15 mins.
Abnormal noise Blade stuck Switch off machine and allow to
stop completely. Remove
obstruction.
No lubrication Contact authorised dealer
Loose bolts, nuts or safety
equipment.
Tighten. Contact authorised
workshop if noise persists
Abnormal vibrations Depth too great Replace or contact authorised
workshop
Depth too great Use correct depth
Poor cutting action Depth too shallow Use correct depth
Worn blade Replace or contact authorised
workshop
10. Specifications
Model El-Tex 1500
Power suppl
y
230 Volt - 50 Hz
Power consumption 1500 Watt
Cuttin
g
width 38 cm
Max. workin
g
depth 21 cm
Noise level 93 dB
(
A
)
Grease Multifak EP-1 / 90406565
Wei
g
ht 10.5 k
g
RPM
A
pprox. 380/min
Bekijk gratis de handleiding van Texas El-Tex 1500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Texas |
| Model | El-Tex 1500 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7493 MB |
