Handleiding
Je bekijkt pagina 6 van 20
3
Quick Installation
1. Connect Video cable (DisplayPort cable)
Make sure both monitor and computer are powered OFF.
Connect the DisplayPort cable from DisplayPort output of computer to the DisplayPort
input of the monitor.
Daisy Chain
DisplayPort supports Multi-Stream Transport (MST) using a daisy-chained connection
to the monitor or a daisy-chained serial connection via a USB-C port. USB-C cable is
connected from the computer to the monitor, and then a subsequent monitor is
connected using the DisplayPort cable in the link.
Important note:
• DisplayPort daisy-chained serial connection, all devices must support DisplayPort 1.2
and Multi-Stream Transport (MST).
• Maximum external monitor resolution with the maximum number of external monitors
supported is 3840 x 2160 @60 Hz only when DSC(Display Stream Compression) is
enabled on graphic cards or with graphic cards that support DSC.
Note: The number of daisy-chained displays may vary depending on the computer
being used.
Note: Support for daisy chaining via USB-C ports may result in different video formats
depending on the computer or laptop being used, which can be switched from USB
Version 2.0 or 3.1 in the display's OSD.
Or connect USB-C cable
Connect the USB-C cable from USB-C output of computer to the USB-C input of the
monitor.
Important note: Please use the supplied USB-C cable. If you use any other USB-C
cable, it must explicitly support video transmission and power delivery (notebook or
tablet charging).
If you want to transfer the video signal by USB-C, make sure the USB-C port of the
PC, notebook or tablet is capable for video transmission and the latest BIOS and
drivers are installed.
Or connect HDMI cable *Optional
Connect the HDMI cable from HDMI output of computer to the HDMI input of the
monitor.
2. Connect Power cord
Connect the power cord to a properly grounded AC outlet, then to the monitor.
3. Connect the USB devices.
Connect the USB devices to the USB connectors of the monitor.
Important note: USB-C cable must be connected first.
Note: The speed of the USB devices can be selected in the OSD menu (USB 2.0
or 3.1). USB 2.0 is default setting for best compatibility.
Bekijk gratis de handleiding van Terra 3295W PV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Terra |
| Model | 3295W PV |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 2090 MB |
