Teradek Ranger Micro MKII handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081/ 81

Afdrukken

Je bekijkt pagina 47 van 81

/<78A,8FF<@:EA@R:GD4F<A@

<EB>4K,8FF<@:E

Use the Display Settings to control the OLED display operation. By default, the OLED display will invert

every 30 minutes. You can set the display to invert every 30 minutes (lengthens the display life), or it can

dim or turn off after either 10 minutes or 10 seconds.

• +AF4F8N

• "@H8DF8H8DK?<@

• <?8H8DK?<@

• <?49F8DE86

• <?49F8D?<@

• (9949F8DE86

• 'AGD@<@)D8H8@F<A@

!&","(GFBGF+4@:8D&=""+1A@>K

You can choose to match the video source’s resolution (,4?8E"@BGF) or choose from the resolutions

list. If using the receiver with a recorder or monitor that is sensitive to video signal changes, select

A@F<@GAGE(GFBGF to ensure the signal stays constant even if the link is interrupted. Keep in mind that

selecting Continuous Output adds a small delay to the video output. Selecting,, !, or  

.!matches the video source's frame rate while adjusting the resolution. This is useful for when you

need to down-convert a 4K video to display on an HD monitor.

Teradek User Manual

)4:8Ranger Micro | Mk II

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081/ 81

Bekijk gratis de handleiding van Teradek Ranger Micro MKII, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd