Tenda W12 handleiding
Handleiding
Je bekijkt pagina 97 van 109
90
8.4.2 Restore the Factory Settings
If you cannot locate a fault of the AP or forget the password of the web UI of the AP, you can reset
the AP to restore its factory settings and then configure it again.
− When the factory settings are restored, your configuration is lost. Therefore, you need to reconfigure
the AP to reconnect to the internet. Restore the factory settings of the AP only when necessary.
− To prevent AP damages, ensure that the power supply of the AP is normal when the AP is reset.
− After the factory settings are restored, the login IP address of the AP is changed to 192.168.0.254,
and the user name and password of the AP are changed to admin.
Method 1:
This method enables you to restore the factory settings without logging in to the web UI of the AP.
Procedure: When the SYS LED indicator blinks green, uncover the AP, use a pin to press the reset
button (RST) for 8 seconds and release it until the green LED indicator turns solid on.
The AP is restored to factory settings when the green LED indicator (SYS indicator) blinks again.
Method 2:
Step 1 Log in to the web UI of the AP, choose Tools > Configuration and click the Reset tab.
Step 2 Click the Reset button.
Step 3 Click OK.
---End
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
