Tenda W12 handleiding
Handleiding
Je bekijkt pagina 93 van 109
86
8.3.2 Configure Log Settings
To access the page, choose Tools > Logs and click Log Settings.
This page enables you to set the number of logs to be displayed and configure log servers.
Parameter description
Parameter
Description
Number of Logs
It specifies the largest number of logs that can be displayed on the web UI.
Enable Log Service
It specifies whether to enable the log service function. This function is disabled by
default.
Log servers can be configured only if the log service function is enabled.
Log Server IP Address
It specifies the IP address of the log server.
To ensure that system logs can be sent to the log server, set the IP address, subnet
mask and gateway of the AP on the Network Settings > LAN Setup page to enable
the AP to access the log server.
Log Server Port
It specifies the port (514 by default) used by the log service. It should be the same
port with the port configured by the log server.
Status
It specifies the status of the log server rule.
Operation
It specifies the operations you can perform on the log server:
Click to modify the IP address, port, or status of the log server.
Click to delete the target log server.
Add
Click it to add a log server.
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
