Tenda W12 handleiding
Handleiding
Je bekijkt pagina 83 van 109
76
Configure the SNMP Function
Step 1 Choose SNMP and set SNMP Agent to Enable.
Step 2 Set related SNMP parameters.
Step 3 Click Save.
---End
Parameter description
Parameter
Description
SNMP Agent
It specifies whether to enable the SNMP agent function of the AP. By default, it is
disabled.
An SNMP manager and the SNMP agent can communicate with each other only if their
SNMP versions are the same. Currently, the SNMP agent function of the AP supports
SNMP V1 and SNMP V2C.
Administrator
It specifies the name of the administrator of the AP. The default name is Administrator.
You can change the name as required.
Device Name
It specifies the device name of the AP. The default device name is the model of the AP.
It is recommended that you change the AP name so that you can easily identify the AP
when managing the AP using SNMP.
Location
It specifies the location where the AP is used. The default location is ShenZhen. You can
change the location as required.
Read Community
It specifies the read password shared between SNMP managers and this SNMP agent.
The default password is public.
The SNMP agent function of the AP allows an SNMP manager to use the password to
read variables in the MIB of the AP.
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
