Tenda W12 handleiding
Handleiding
Je bekijkt pagina 77 van 109
70
Parameter
Description
LAN Port
It specifies the LAN ports of the AP, including LAN0 and LAN1.
LAN0 indicates the LAN port at the rear of the AP (PoE power supply, data transmission
multiplexing port), whereas LAN1 indicates the LAN port (data transmission port) at the
front of the AP
LAN ports not set as a trunk port can be seen as an access port. You can set a VLAN ID
for it.
2.4 GHz SSID
It specifies the currently enabled SSIDs of the AP at 2.4 GHz band.
5 GHz SSID
It specifies the currently enabled SSIDs of the AP at 5 GHz band.
VLAN ID
It specifies VLAN IDs corresponding to SSIDs. The default value is 1000. After the QVLAN
function is enabled, the wireless ports corresponding to SSIDs functions as access ports.
The PVID and VLAN ID of an access port are the same.
6.7.2 Configure the QVLAN Function
Step 1 Choose Wireless Setting > QVLAN Settings.
Step 2 Select the Enable check box.
Step 3 Change the parameters as required. Generally, you only need to change the Enable, LAN
Port, 2.4 GHz SSID VLAN ID and 5 GHz SSID VLAN ID settings.
Step 4 Click Save.
---End
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
