Tenda W12 handleiding
Handleiding
Je bekijkt pagina 64 van 109
57
Parameter
Description
RTS Threshold
Frame length threshold for triggering the RTS/CTS mechanism. The unit is byte.
If a frame exceeds this threshold, the RTS/CTS mechanism is triggered to reduce
conflicts.
Set the RTS threshold based on the actual situation. An excessively small value increases
the RTS frame transmission frequency and bandwidth requirement. A higher RTS frame
transmission frequency enables a wireless network to recover from conflicts quicker.
For a wireless network with high user density, you can reduce this threshold to reduce
conflicts.
The RTS mechanism requires some network bandwidth. Therefore, it is triggered only
when frames exceed this threshold.
DTIM Interval
Countdown before this device transmits broadcast and multicast frames in its cache.
The unit is Beacon interval.
For example, if DTIM Interval is set to 1, this device transmits all cached frames at one
Beacon interval.
Minimum RSSI
Threshold
Minimum strength of received signals acceptable to this device. If the strength of the
signals transmitted by a wireless device is weaker than this threshold, the wireless
device cannot connect to this device.
A proper value facilitates wireless devices to connect to the AP with stronger signal in
case of multiple APs exist.
Prioritize 5 GHz
It specifies that dual band wireless devices prefer the 5 GHz WiFi network of the AP to
connect.
5 GHz Threshold
With this function enabled, if the strength of the signals transmitted by a wireless
device is stronger than this threshold, the wireless device connects to the 5 GHz WiFi
network. Otherwise, it connects to the 2.4 GHz WiFi network.
Air Interface
Scheduling
Used to enable or disable the air interface scheduling function of the AP.
This enables the users experiencing high download rates to download more data, so
that this device can achieve higher system throughput and connect to a greater number
of clients.
APSD
Automatic Power Save Delivery.If it is enabled, the power consumption of this device is
reduced after a specified period during which no traffic is transmitted or received. By
default, it is disabled.
Client Timeout
Interval
Used to set the wireless client disconnection interval of this device. The device
disconnects from a wireless client if no traffic is transmitted or received by the wireless
client within the interval.
Mandatory Rate
It specifies rates that wireless clients must support in order to connect to the wireless
networks of this device.
Optional Rate
It specifies the additional rates that the AP supports, which are optional to wireless
clients.
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
