Tenda W12 handleiding
Handleiding
Je bekijkt pagina 105 van 109
98
8.9 Uplink Check
8.9.1 Overview
In AP mode, the AP connects to its upstream network using the LAN0 port. If a critical node
between the LAN0 port and the upstream network fails, the AP as well as the wireless clients
connected to the AP cannot access the upstream network. If uplink check is enabled, the AP
regularly pings specified hosts through the LAN0 port. If all the hosts are not reachable, the AP
stops its wireless service and wireless clients cannot find the SSIDs of the AP. The client can
reconnect to the AP only after the connection between the AP and the upstream networks is
recovered.
If the uplink of the AP with uplink check enabled is faulty, wireless clients can connect to the
upstream network through another nearby AP that works properly.
See the following topology (The LAN0 port serves as the uplink port).
8.9.2 Configure Uplink Check
Step 1 Choose Tools > Uplink Check.
Step 2 Select the Enable check box of Uplink Check.
Step 3 Set Host 1 to Ping or Host 2 to Ping to the IP address of the host to be pinged through the
LAN0 port of the AP, such as the IP address of the switch or router directly connected to
the AP.
Internet
Router
PoE switch
AP
WAN
LAN
Clients
Uplink network
LAN
Bekijk gratis de handleiding van Tenda W12, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | W12 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15209 MB |
