Tenda i36 handleiding
Handleiding
Je bekijkt pagina 62 van 111
56
Document Version: V1.3
The prioritize 5 GHz function takes effect only on the condition that the wireless both of the 2.4 GHz and 5
GHz are enabled, and the two bands share the same SSID, security mode and password.
ļ
Air interface scheduling
In mixed wireless rates environment, the traditional First-in First-out (FIFO) allocates more air
interface time to clients with low transmission capacity and low spectrum efficiency, reducing the
system throughput of each AP then the system utilization.
The air interface scheduling function evenly allocates downlink transmission time to clients so that
clients with high transmission rate could transmit more data, improving the throughput of each AP
and number of clients allowed to be connected.
7.4 Load balancing
7.4.1 Load balancing between APs
In an actual wireless network environment, especially in high-density scenarios, it often happens
that too many users connect to a certain AP. As a result, some APs are overloaded while others are
idle. The load balancing between APs function can accurately balance the load among these APs. In
this way, the utilization of network resources can be maximized and the utilization rate of system
resources can be effectively improved.
Disable Prioritize 5 GHz
2.4 GHz
5 GHz
Dual-band clients
to 2.4 GHz
Dual-band clients
to 5 GHz
Enable Prioritize 5 GHz
2.4 GHz
5 GHz
Dual-band clients
to 2.4 GHz
Dual-band clients
to 5 GHz
* Assume that the max. number of clients
allowed to connect to the 5 GHz is 10.
Bekijk gratis de handleiding van Tenda i36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | i36 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18170 MB |
