Tenda i36 handleiding
Handleiding
Je bekijkt pagina 61 van 111
55
Document Version: V1.3
Parameter
Description
Client Timeout
Interval
Used to set the wireless client disconnection interval of this device. The device
disconnects from a wireless client if no traffic is transmitted or received by the wireless
client within the interval.
Mandatory Rate
Specifies rates that wireless clients must support in order to connect to the wireless
networks of this device.
Optional Rate
Specifies the additional rates that the AP supports, which are optional to wireless clients.
The clients meeting the mandatory rate can connect to the AP with higher rate.
Prioritize 5 GHz
Specifies whether to enable the prioritize 5 GHz function.
If this function is enabled, dual band WiFi-enabled devices prefer the 5 GHz wireless
network of the AP to connect when the 5 GHz signal strength transmitted by devices is
greater than or equal to the Prioritize 5 GHz Threshold.
Prioritize 5 GHz
Threshold
With this function enabled, if the strength of the signals transmitted by a WiFi-enabled
device is greater than or equal to this threshold, the WiFi-enabled device connects to the
5 GHz wireless network. Otherwise, it connects to the 2.4 GHz wireless network.
ļ
Prioritize 5 GHz
Although the 2.4 GHz band is more widely used than the 5 GHz band in actual wireless networks
application, channels and signals on 2.4 GHz suffer more serious congestion and interference since
there are only 3 non-overlapped communication channels on this band. The 5 GHz band could
provide more non-overlapped communication channels. The quantity could reach more than 20 in
some countries.
With the evolvement of the wireless networks, wireless clients that support both the 2.4 GHz and 5
GHz are more popular. However, by default, such dual-band wireless clients choose the 2.4 GHz to
connect, resulting in even worse congestion of the 2.4 GHz band and the waste of the 5 GHz band.
The prioritize 5 GHz function enables such dual-band wireless clients to connect the 5 GHz band on
network initialization if the 5 GHz signal strength the AP received reaches or exceeds the 5 GHz
threshold so as to improve the utilization of the 5 GHz band, reduce the load and interference on
the 2.4 GHz band, thus bettering user experience.
Bekijk gratis de handleiding van Tenda i36, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | i36 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18170 MB |
