Tenda EE3 Pro handleiding
Handleiding
Je bekijkt pagina 152 van 159
145
Document version: V1.0
9 FAQ
9.1 Failed to access the web UI
Use the following method to troubleshoot the fault, and then try again.
If you are using a wireless device, such as a smartphone:
− Ensure that it is connected to the Wi-Fi network of the node.
− Ensure that the cellular network (mobile data) of the device is disabled.
− Use another smartphone or tablet to log in to the web UI.
If you are using a wired device, such as a computer:
− Ensure that the Ethernet cable between your computer and the node (before mesh
networking, connect to the primary node; after mesh networking, connect to any node) is
connected properly.
− Ensure that your computer is set to Obtain an IP address automatically.
− Ensure that the login address (tendawifi.com, or 192.168.0.1 by default) you entered is
correct.
− Clear cache of your browser, or use another browser.
− Use another computer to log in to the web UI.
Hold down the reset button (RESET) for about 8 seconds to restore the mesh device to factory
settings.
9.2 Internet detection failed upon the first setup
Use the following method to troubleshoot the fault, and then try again.
Ensure that the Ethernet cable for internet connection is connected to the primary node.
Ensure that the Ethernet cable is not damaged and well-connected, and the modem is powered
on.
If the problem persists, please contact your ISP.
Bekijk gratis de handleiding van Tenda EE3 Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tenda |
| Model | EE3 Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 24960 MB |
