Telycam Vision+ VP300-12-4KN handleiding
Handleiding
Je bekijkt pagina 52 van 56
〓〓〓〓〓〓 VISCA over IP 〓〓〓〓〓〓
— 50 —
equipment will save sequence number of each command, and return the sequence
number to the controller.
Payload
According to Payload type, the following data will be saved.
VISCA command
Save VISCA command packet
VISCA inquiry
Save VISCA message packet
VISCA reply
Save VISCA return packet
VISCA device setting command
Save VISCA equipment setting command packet.
Control command
The following data is saved in control command payload
Name
Value
Description
RESET
0x01
Resets the sequence number to 0. The value that
was set as the sequence number is ignored.
ERROR
0x0Fyy
yy=01:Abnormality in the sequence number.
yy=02:Abnormality in the message(message
type).
Controlled reply
The following data is saved in return command payload of control command.
Message
Value
Description
ACK
0x01
Reply for RESET.
Delivery confirmation
VISCA over IP uses UDP as transmission communication protocol, UDP
communication message transmission is not stable, it is necessary to confirm
delivery and resent in application.
Generally, when controller sends a command to peripheral equipment,
Bekijk gratis de handleiding van Telycam Vision+ VP300-12-4KN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Telycam |
| Model | Vision+ VP300-12-4KN |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 7888 MB |
