Telycam Explore SE 4K handleiding
Handleiding
Je bekijkt pagina 40 van 62
〓〓〓〓〓〓 OSD MENU 〓〓〓〓〓〓
— 39
—
1. Under working mode, press the MENU key on the IR remote controller, to
enter the OSD menu as below:
2. After entering the main menu, use the navigate UP/DOWN key to select the
main menu. Once selected, the main menu will change to the blue background,
and the right side will show sub-menu options.
3. Press the navigate RIGHT key to enter the sub-menu; use the UP/DOWN key
to select the sub-menu; use the LEFT/RIGHT key to select the parameter.
4. Press the MENU key again to return to the previous menu. Press the MENU
key continuously to exit the OSD menu.
5. OSD Menu Setting List
SYSTEM
PROTOCOL
Optional: VISCA, PLC.P, PLC.D
Default: VISCA
ADDRESS
VISCA:: 1~7 PLC-P/D: 0~255
Default: 1
BAUDRATE
Optional：2400, 4800, 9600, 115200
Default: 9600
PROTOCOL
LOCK
Optional：OFF, ON
Default: OFF
RS485
Optional：OFF, ON
Default: ON
LANGUAGE
Optional: ZH-CH, ENGLISH, ZH-TW,
RUSSIAN
Default: ENGLISH
TALLY
BRIGHTNESS
Optional：OFF, LOW, MIDDLE, HIGH
Default: HIGH
PHANTOM
POWER
Optional：OFF, ON
Default: OFF
SYSTEM
MODE
Optional：DIGITAL, FULL NDI
Default: DIGITAL
Bekijk gratis de handleiding van Telycam Explore SE 4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Telycam |
| Model | Explore SE 4K |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 8754 MB |
