Telycam Drive+ SE handleiding
Handleiding
Je bekijkt pagina 30 van 40
28
Image includes mirror, flip, backlight compensation, Gamma, WDR(wide dynamic range).
Image Quality includes brightness, sharpness, contrast, saturation.
Noise reduction includes 2D/3D reduction. There is on/off option for 2D, and off/auto/1~4 six options.
“Ethernet” includes DHCP mode, IP address, Net mask, Gateway, HTTP Port, RTSP Port, Visca Over IP. Default parameter as
following:
DHCP
OFF
Gateway
192.168.1.1
RTSP Port
554
IP address
192.168.1.188
DNS
192.168.1.1
RTSP Encrypt
ON
Netmask
255.255.255.0
HTTP Port
80
Visca Over IP
52381
“Firmware upgrade”: it is for camera program upgrade, currently only for ISP part update. How to update:
As following picture, click “clicking to upload file” icon, open dialog box, select to open the file, and click “upgrade” to start.
DO NOT power off or do other operation when upgrading, reboot the camera after 5 min when upgrade finished.
Then login web end to select “reset all” to reset the camera completely.
Bekijk gratis de handleiding van Telycam Drive+ SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Telycam |
| Model | Drive+ SE |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 5672 MB |
