Telycam Drive+ SE handleiding
Handleiding
Je bekijkt pagina 24 van 40
22
IMAGE
WB MODE
Optional：ATW、MANUAL、AUTO、INDOOR、OUTDOOR、
PUSH
Default：ATW
R GAIN
Red gain level: 0~255, only valid under manual white balance mode
Default：AUTO
B GAIN
Blue gain level:0~255 , only valid under manual white balance mode
Default：AUTO
FLICK
Anti-Flicker setting:50/60HZ, to reduce the video flicker
Default：50HZ
DZOOM
ON/OFF
Default：OFF
FOCUS
Select focus mode
Default：AUTO
QUALITY
2D NR
2D noise reduction: the bigger value is, the less noise on image
is, the lower resolution is.
Default：OFF
3D NR
3D noise reduction: OFF/AUTO/0~4, the bigger value is, the
less motion noise on image is. High value will cause image
smear.
Default：AUTO
SHARPNESS
Sharpness setting: 0~15, the higher value is, edge of the image
will be sharpen
Default：3
CONTRAST
Set contrast level
Default：8
SATURATION
Set saturation.
Default：8
GAMMA
Select gamma level
Default：0
AF SENSITIVITY
Optional：LOW/NORMAL/HIGH
Default:
NORMAL
PTZ
SPEEDBYZ
Speed By Zoom: proportional speed, the bigger the zoom is, the
slower the speed is
Default：ON
FLIP.HOR
Flip horizontal
Default：OFF
FLIP VER
Flip vertical
Default：OFF
PT SPD
Pan Tilt speed
Default：18
ZOOM SPD
Zoom speed
Default：5
MENU MIR
Optional Item: NORMAL、MIRROR
Default:NORMAL
PRE FRZ
Open/Close Video Freeze when running presets
Default：OFF
PRE PTSPD
Preset head speed: 2~24
Default：15
PRE ZSPD
Preset zoom speed: 1~7
Default：5
Bekijk gratis de handleiding van Telycam Drive+ SE, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Telycam |
| Model | Drive+ SE |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 5672 MB |
