Telycam Drive+ SE DP300-20H handleiding
Handleiding
Je bekijkt pagina 35 van 40
33
VISCA OVER IP
VISCA over IP means VISCA protocol transmit via IP, to reduce RS232/RS485 cable layout (the controller must support IP
communication function)
Communication port spec:
⚫ Control port: RJ45 Gigabit LAN
⚫ IP protocol: IPv4
⚫ Transmit protocol: UDP
⚫ IP address: set via web end or OSD menu
⚫ Port address: 52381
⚫ Confirm send/transmission control: depend on applied program
⚫ Applied range: in the same segment, not suitable for bridge network
⚫ Turn on camera: In the menu, set VISCA option to OVER IP
How to use VISCA over IP
VISCA Command
It means commands from controller to peripheral equipment, when peripheral equipment receives commands, then return ACK.
When commands executed, will return complete message.
For different commands, camera will return different message.
VISCA Inquiry
It means inquiry from controller to peripheral equipment when peripheral equipment receives this kind of commands, it will
return required message.
VISCA Reply
It means ACK, complete message, reply or error reply, it is sent from peripheral equipment to controller.
Command format: the following is message head and valid message format.
Bekijk gratis de handleiding van Telycam Drive+ SE DP300-20H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Telycam |
| Model | Drive+ SE DP300-20H |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 5672 MB |
